YVP motor parameters:How do I read a YVP motor nameplate and map its parameters to a VFD setup in 2026?

Q: How do I read a YVP motor nameplate and map its parameters to a VFD setup in 2026?

A: Reading a YVP motor nameplate in 2026 is straightforward if you know the standard fields. Start with model designation, which often encodes frame size and pole count. Rated voltage (e.g., 380V), rated frequency (50 Hz), and rated current are the first parameters to enter into the VFD motor data group. Next, note rated power (kW), rated speed (rpm), power factor, and efficiency class; these let the drive auto-tune. The insulation class and duty cycle (S1 continuous) tell you thermal limits, while the frequency range (e.g., 5-100 Hz) defines the allowable speed window for the VFD. If the motor has an encoder, match its pulses per revolution and signal type to the drive's feedback card. Overload rating (e.g., 150% for 60s) should align with the VFD's overload settings. For sensorless vector control, enter stator resistance and inductance if provided. Finally, confirm protection degree and cooling method so ambient derating is applied correctly. Mapping these nameplate parameters precisely ensures optimal torque response, prevents nuisance trips, and extends motor life. Always cross-check with the manufacturer's datasheet, since nameplates only list essential values.

Dialogue about

Common scenarios of "YVP motor parameters"

【Engineer】 Hello, I'm an engineer working on a project that uses YVP motors. I need to understand the motor parameters to properly integrate it into our system.

【Technician】 Hello! I'm a technician familiar with YVP motors. I'd be happy to help. What specific parameters are you interested in?

【Engineer】 First, what does YVP stand for? I want to make sure we're on the same page.

【Technician】 YVP stands for 'Variable Frequency Drive' in Chinese (变频调速). It's a type of motor designed to work with variable frequency drives for speed control.

【Engineer】 Got it. What are the typical power ratings available for YVP motors?

【Technician】 YVP motors come in a wide range, from 0.55 kW up to several hundred kW. Common ratings include 1.5 kW, 2.2 kW, 7.5 kW, 15 kW, 30 kW, 55 kW, etc.

【Engineer】 What about the voltage and frequency? Are they standard?

【Technician】 Typically, they are designed for 380V, 50Hz in China, but they can also be customized for other voltages like 220V, 440V, etc., depending on the application.

【Engineer】 I see. What is the speed range? I assume it's adjustable due to the variable frequency drive.

【Technician】 Yes, the speed can be adjusted by changing the frequency. The base speed is usually around 1450 rpm at 50Hz for a 4-pole motor, but it can go lower or higher depending on the VFD settings.

【Engineer】 What about the efficiency class? Are YVP motors IE2, IE3, or something else?

【Technician】 Most YVP motors meet IE2 efficiency standards, but higher efficiency IE3 models are also available. It depends on the manufacturer and the specific model.

【Engineer】 What is the insulation class and protection degree?

【Technician】 Typically, they have Class F insulation and IP55 protection. Some may have IP54 or higher, but IP55 is common for standard models.

【Engineer】 How about the duty cycle? Can they run continuously at low speeds?

【Technician】 YVP motors are designed for continuous duty (S1), but at low speeds, the cooling might be less effective because the built-in fan depends on the motor speed. For prolonged low-speed operation, an independent cooling fan is recommended.

【Engineer】 That's a good point. What are the torque characteristics? Constant torque or variable torque?

【Technician】 YVP motors can be designed for either constant torque or variable torque loads. For constant torque applications, they often have a higher power rating at low speeds. You need to specify the load type when selecting.

【Engineer】 What about the frame size and mounting? Are they standard IEC frames?

【Technician】 Yes, they usually follow IEC standard frame sizes, such as 80M, 90L, 100L, 112M, etc., with B3, B5, or B35 mounting options.

【Engineer】 Thanks for the info. One last question: what are the typical applications for YVP motors?

【Technician】 They are widely used in conveyors, pumps, fans, mixers, extruders, and other applications where variable speed control is needed. They are especially popular in industries like metallurgy, chemical, textile, and food processing.